Risco ProSYS Plus Installation And Programming Manual page 2

Important Notice
This guide is delivered subject to the following conditions and restrictions:
This guide contains proprietary information belonging to RISCO Group. Such information is
supplied solely for the purpose of assisting explicitly and properly authorized users of the
system. No part of its contents may be used for any other purpose, disclosed to any person
or firm, or reproduced by any means, electronic or mechanical, without the express prior
written permission of RISCO Group.
The information contained herein is for the purpose of illustration and reference only.
Information in this document is subject to change without notice. Corporate and individual
names and data used in examples herein belong to their respective owners.
© RISCO Group 2016. All rights reserved. No part of this document may be reproduced in
any form without prior written permission from the publisher.
Compliance Statement
Hereby, RISCO Group declares that the ProSYS Plus series of central units and accessories
are designed to comply with:
EN50131-1, EN50131-3 Grade 3
EN50130-5 Environmental class II
EN50131-6 Type A
UK: BS 8243:2010, PD 6662:2010, ACPO (Police)
EN50136-1, EN50136-2 and EN50131-10
ATS6 for IP/GPRS; ATS 2 for PSTN
ATS EN50136-1 Category C (PSTN, GSM, IP transmission paths in parallel)
Signaling security:
•
Substitution security S2
•
Information security I3
11/2017 Page 2 5IN2413 B