Risco ProSYS Plus Installation And Programming Manual page 84

Quick keys Parameter
 
Audible Jamming
Relates to the Jamming Time parameter, described on page 79
YES: Once the specified time is reached, the main panel activates any
internal sounders and sends a report code to the monitoring station.
NO: Same as above, except the internal sounders do not operate.
 
Exit Beeps at Stay
Determines whether the system will sound beeps during the exit time
when in Stay arming (partial arming).
YES: Exit beeps will sound.
NO: Exit beeps will not sound.
 
Forced Keyswitch
Arming
YES: Keyswitch or Proximity Key arming is performed on any partition.
Any violated ("Not Ready") zones in the partition will be bypassed
automatically. The partition is then "force-armed," and all intact zones are
capable of producing an alarm.
NO: The partition cannot be armed until all violated ("Not Ready") zones
are secured.
 
Arm Pre-Warning
Related to auto arm/disarm operation.
YES: For any partition(s) set up for auto arming, an audible exit delay
(warning) countdown will commence 4.25 minutes prior to the automatic
arming. During this period, exit delay beeps will be heard.
You can enter a valid user code at any time during the countdown to
delay the partition's automatic arming by 45 minutes.
When an "Auto-Arm" partition is disarmed, as described above, it can no
longer be automatically armed during the current day.
The extended 4.25 minutes warning does not apply to automatic partial
arming.
NO: Auto arming for any programmed partition(s) takes place at the
designated time. The programmed exit delay period and any audible
signal occur as expected.
11/2017
Default
No
No
Yes
No
Page 84
Range
Yes/No
Yes/No
Yes/No
Yes/No
5IN2413 B