Parts, Tools, Materials - Kenmore SPACEMASTER 85210 Installation Instructions Manual

THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:
NOTE: You may not use all of these parts.
Damper/duct connector
(for roof-venting or wall -venting installation)
Two tapping screws
(for attaching the damper duct connector)
One power cord bushing (for the cord hole in a metal upper cabinet)
Four 1/4" x 2" lag screws
(for wall stud holes)
Two 1/4" x 2" bolts
(for securing to the upper cabinet)
Two washers
(for the two upper cabinet bolts)
NOTE: You need to install at least one lag screw into a 2" x 4" stud and four anchor bolts into the wall and the
mounting area must meet the 150+ lbs. weight requirement.

PARTS, TOOLS, MATERIALS

- 5 -
One power cord clamp and
One dark-colored mounting screw
(to hold the power cord)
One lock pin and one washer
Four 1/4" x 3" toggle bolts
(for drywall holes)
Four spring toggle heads
(for the toggle bolts)