Parts, Tools, Materials - Kenmore 721.80002 Installation Instructions Manual

PARTS, TOOLS, MATERIALS
THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:
NOTE: Depending on your ventilation requirements, you may not use all of these parts.
Damper/duct connector One power cord clamp and
(for roof vented or wall vented installation). One dark-colored mounting screw
Not Actual Size (to hold the power cord).
Actual Size %,
One power cord clamp bushing - Actual Size
(for the cord hole in a metal upper cabinet). aL
6
C c
n
=
Four 1/4" x 2" lag screws - Actual Size Four 1/4" x 3" toggle bolts - Actual Size
(for wall stud holes). (for drywall holes}.
(oa
Four 1/4" x 3" bolts - Actual Size Twe tapping screws - Actual Size
(for securing to the upper cabinet). (for attaching the damper duct connector)
Four spring toggle heads - Actual Size One upper cabinet template
(for the toggle bolts). - Not Actual Size
NOTE: You need to install at least one lag screw into a 2" x 4" stud and four anchor bolts into the wall,
and the mounting area must meet the 150 Ibs. weight requirement.