Parts, Tools, Materials; Tools And Materials - Kenmore 721.80002 Installation Instructions Manual

PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE
INSTALLATION:
Carton or other heavy material for covering the counter top.
Clear tape
(for taping the templates to the wall)
Stud finder or thin nail.
Saber saw (for cutting vent holes for roof
or wall venting)
Phillips screwdriver (for the screws)
Pencil
Flat blade screwdriver (for the bolts)
Key hole saw (for the power cord hole)
3/8" and 3/4" wood drill bits ,_
1/2" and 3/16"
drill bits
Plumb line
Duct Tape
Measuring tape (metal preferred)
Small side cutters or tin snips
,,i
Caulking gun
• If you have brick or masonry walls, you need special hardware and tools.
• The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft
damper.