Mounting The Hoseproof Hollow Shaft Cover - Lenze g500 Series Mounting Instructions

4 Mechanical installation
Preparation

Mounting the hoseproof hollow shaft cover

4.3.12 Mounting the hoseproof hollow shaft cover
With the g500−B gearbox, the hoseproof hollow shaft cover is bolted down directly in
the housing.
1 Protection cover
2 Cheese head screw
1. Place seal (4) between the flange and the protection cover (1).
2. Fasten the protection cover (1) on the housing flange using cheese head screws
(2).
42
A-A
A
A
4
X
X
Seal
4
2
1
Lenze ¯ MA 12.0014 ¯ 5.1