4
Mechanical installation
Preparation
Mounting of motors to gearboxes with an adapter
4.3.6
Mounting of motors to gearboxes with an adapter and a flexible coupling
When mounting a motor to an adapter, be sure to observe a fully circumferential
contact of the flange faces, thus ensuring that there is no aperture to the interior of the
adapter.
With higher degrees of protection or when there is a risk of dirt or humidity entering,
additionally seal the contact surfaces with a suitable sealant.
0
Spider / gear rim
1
Coupling hub
28
1
Locking screw
2
Keyway
m
1
B14/ FT
2
l
B5/FF
m
Lenze ¯ MA 12.0014 ¯ 5.1
g500−H_X−002.iso