Advertisement
2. SPECIFICATIONS AND TECH-
NICAL DATA
1.
NAME OF PARTS
2
7
1
6
4
5
10
2.
TOOL SPECIFICATIONS
PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
RECOMMENDED OPERATING
PRESSURE
LOADING CAPACITY
AIR CONSUMPTION
* The machine has been compactly designed in order to
improve operating weight balance.
3.
FASTENER SPECIFICATIONS
PRODUCT NO.
CROWN
LENGTH
WIDTH
THICKNESS
GAUGE
CROWN
LENGTH
THICKNESS
TOOL AIR FITTINGS:
This tool uses a 1/4" N.P.T. male plug. The inside diameter
should be 7mm (.28") or larger. The fitting must be capable of
discharging tool air pressure when disconnected from the air
supply.
1 Frame
2 Cylinder Cap
3
3 Exhaust Port
4 Slider Unit
5 Magazine
8
6 Trigger
7 Grip
8 Click Lever
9 Warning Label
9
(back side)
10 Outlet
TA238A/18-6
241.5mm (9-1/2")
64mm (2-1/2")
231mm (9-1/8")
1.2kg (2.71lbs)
5 to 7bar
(70 to 100 p.s.i.)
109staples
3
0.61l(0.022ft
) at 7 bar
operating pressure
TA238A/18-6
6.4mm (1/4'')
13 to 38mm
(1/2''to1-1/2'')
1.25mm (.05'')
1.12mm (.044'')
18
WIDTH
RECOMMENDED OPERATING PRESSURE:
5 to 7 bar (70 to 100 p.s.i.). Select the operating air pressure
within this range for best fastener performance.
DO NOT EXCEED 8.3 bar (120 p.s.i.).
4.
TECHNICAL DATA
1
NOISE
A-weighted single-event sound power level
A-weighted single-event emission sound pressure level at
work station
These values are determined and documented in accor-
dance to EN12549 : 1999.
2
VIBRATION
Vibration characteristic value = 2.66 m/s
These values are determined and documented in accor-
dance to ISO 8662-11.
This value is a tool-related characteristic value and does
not represent the influence to the hand-arm-system when
using the tool. An influence to the hand-arm-system when
using the tool will, for example, depend on the gripping
force, the contact pressure force, the working direction, the
adjustment of mains supply, the workpiece, the workpiece
support.
5.
APPLICATIONS
* Door and window casings
* Plywood, decorative boards, and other interior finish works
* Panel assembly and moldings
* Sub flooring
* Furniture assembly including drawer assembly, case back
fastening, blind pinning, and other finishing works
* Cabinet assembly
5
------ LWA, 1s, d 87.2 dB
------- LpA, 1s, d 79.7 dB
2
Advertisement
