Advertisement
DEFINITIONS OF SIGNAL WORDS
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
NOTE:
Emphasizes essential information.
INDEX
1. SAFETY INSTRUCTIONS.................................................. 2
2. SPECIFICATIONS AND TECHNICAL DATA..................... 5
3. AIR SUPPLY AND CONNECTIONS .................................. 6
4. INSTRUCTIONS FOR OPERATION.................................. 6
5. MAINTENANCE ................................................................. 9
6. STORAGE .......................................................................... 9
7. TROUBLE SHOOTING/REPAIRS ..................................... 9
1. SAFETY INSTRUCTIONS
WARNING
TO AVOID SEVERE PERSONAL INJURY OR PROPERTY
DAMAGE
BEFORE USING THE TOOL, READ CAREFULLY AND
UNDERSTAND THE FOLLOWING "SAFETY INSTRUC-
TIONS". FAILURE TO FOLLOW WARNINGS COULD RE-
SULT IN DEATH OR SERIOUS INJURY.
www.max-ltd.co.jp/int/eu/
PRECAUTIONS ON USING THE TOOL
1.
2
WEAR SAFETY GLASSES OR GOGGLES
Danger to the eyes always exists due to the possibility of
dust being blown up by the exhausted air or of a fastener
flying up due to the improper handling of the tool. For these
reasons, safety glasses or goggles shall always be worn
when operating the tool.
The employer and/or user must ensure that proper eye
protection is worn. Eye protection equipment must conform
to the requirements of Council Directive 89/686/EEC of 21
DEC. 1989 (the American National Standards Institute,
ANSI Z87.1) and provide both frontal and side protection.
The employer is responsible to enforce the use of eye
protection equipment by the tool operator and all other
personnel in the work area.
NOTE: Non-side shielded spectacles and face shields
alone do not provide adequate protection.
Advertisement
