2015 Legacy and Outback
Rear Window Regulator
The rear window regulator of the Legacy and Outback is described as an "I Arm" window regulator.
This type uses a single roller that moves through a channel that is attached to the window glass.
The height of the window is controlled by the position of the roller in the channel.
Rear Window Assembly
The regulator is attached to the door with 4 bolts and is easily removed through the opening in
the lower section of the door.
Regulator Mounting Points
The window glass must be taped to the door to prevent the glass from dropping after the regulator
has been removed.
New Technology Training
1-51
1-53
Window Taped In Position
24
(Module 926)
I Arm And Roller
1-52
1-54
June 2014