2015 Legacy and Outback
New Technology Training
(Module 926)
When the SSM III is not used (In shops that do not have the SSM III):
After removing the pad, turn the piston clockwise (release direction) with the piston rotating tool.
8-31
Turning in Ball Nut (Generic tool)
After installing the pad, operate the foot brake to move the piston to proper position. Operate the
EPB 5 times or more (with the parking brake switch) to move the ball screw to the proper position.
(It is prohibited to push the piston out with the EPB and not with the foot brake).
June 2014
140