2015 Legacy and Outback
Diagnostic Trouble Codes are also available to assist with diagnostics. The data displayed provides
more detailed data than the built in Line Check function.
Both the 6.2 inch and 7.0 inch Infotainment systems are equipped with Line Check functions.
6.2 Inch Display
1.
(a) Press the button to display the Audio OFF screen.
2.
Touch the screen in order from (b) to (e).
Note: To exit the diagnostic mode, turn the ignition switch from ACC OFF to ON.
3.
<<LineDiag>> screen is displayed.
This Line Check function allows the displayed signals to be checked for connection to the
Infotainment system. Activate each device to create the input signal needed to change the detection
status from NG to OK.
The Camera Setting allows adjustment of the displayed guide lines that appear when the vehicle
is in reverse gear range. Audio check rotates the sound from the radio to each speaker. Turn up
the volume to monitor each speaker.
(a)
(b)
(d)
Activating Line Check
Line Diag
Connectivity Check
MIC
OK
Rr_CAM
OK
USB
OK
AUX
OK
SXM
OK
UART
OK
Camera Setting
Audio Check
Line Diagnostic Information
22
New Technology Training
(c)
(e)
1-47
Vehicle Signal Check
+
ILL
OFF
SPD
OFF
PKB
ON
REV
OFF
1-48
(Module 926)
June 2014