2015 Legacy and Outback
Caution: If you loosen the motor attachment bolts with the parking brake engaged, the motor body
will rotate. Use caution to prevent pinching of fingers. Support and hold the actuator and
motor assembly in place and slowly allow it to move to a low tension position before
removing from the caliper.
Caution: If you release the parking brake, the vehicle can start moving. Therefore, check the slope
of the road and be sure the vehicle is securely stopped and front wheels are chocked.
Note:
While the motor is removed from the caliper, dust may contaminate the caliper.
Therefore, after releasing the parking brake, install the motor body and move
(drive) the vehicle.
The motor case contacts with
the caliper and stops.
(The motor case turns clockwise
when the bolts are loosened.)
Install the new actuator seal after the EPB has been restored.
8-26
Left Side
Retracting Ball Nut
New Technology Training
The motor case contacts with
the caliper housing and stops.
(The motor case turns clockwise
when the bolts are loosened.)
8-28
138
(Module 926)
8-27
Right Side
June 2014