Subaru Legacy 2015 Technicians Reference Booklet page 127

2015 Legacy and Outback
The EPB activation and release switch is located on the center console behind the shifter. Pull
up on the switch to activate the EPB. Step on the brake pedal with the engine operating or the
ignition on and push down the switch to deactivate the EPB.
Specifications
Model
Front
Rear
The rear brake caliper is fixed to the caliper mounting bracket on the front side by a spring clip. The
spring clip can be ordered as a separate part. Replace the spring clip if it is deformed or damaged.
Rear Caliper
The spring clip must be able to slide smoothly across the mounting bracket as the outer pad wears.
If the spring clip movement is restricted, premature inner brake pad wear will occur. The back side
of the rear brake caliper is secured to the mounting bracket with two internal hex drive guide pins.
Spring Clip OFF
The guide pins allow the caliper to float on the mounting bracket, providing for automatic clearance
adjustments as the brake pad linings wear.
Outback
Ventilated disc 17"
Ventilated disc 17" (Caliper integrated EPB)
New Technology Training
Sedan
2.5 L
Ventilated disc 16"
8-4
8-6
127
(Module 926)
3.6 L
Ventilated disc 17"
Caliper Spring Clip
Guide Pins
8-5
8-7
June 2014