2015 Legacy and Outback
Remove the center rubber strut caps and prepare the lateral bar supports as shown.
Rubber Strut Cap Installed
Install the Lateral Bar
Prepare new SSTs J-51658 (Engine Bridge Adapter Kit) and place through the provided openings
in the upper radiator garnish. Install the Stanchions with the rubber side facing up.
Note:
Prototypes shown. Actual Tools may vary.
10-59
Rubber Strut Cap Removed
Lateral Bar Installed
Prototype SSTs J-51658
New Technology Training
10-60
10-62
10-63
169
(Module 926)
Lateral Bar Supports Installed
June 2014
10-61