One-Touch Interior Illumination Indicator (If Equipped); Combination Meter Display (Color Lcd) - Subaru Ascent 2023 Manual

194

Combination meter display (color LCD)

NOTE
The Driver Monitoring System stops
temporarily in the following circum-
stances.
. The temperature of the Driver Mon-
itoring System unit is high.
& One-touch Interior Illu-
mination indicator (if
equipped)
This indicator light illuminates when the
One-touch Interior Illumination function is
activated. Refer to "One-touch Interior
Illumination function" �P304.
3-7. Combination meter dis-
play (color LCD)
WARNING
Always pay adequate attention to
safe driving when operating the
combination meter display while
the vehicle is in motion. When
operation of the combination meter
display interferes with your ability to
concentrate on driving, stop the
vehicle before performing opera-
tions on the screen. Also, do not
concentrate on the display while
driving. Doing so may cause you to
look away from the road and could
result in an accident.
Various information will be shown on the
combination meter display. Also, a warn-
ing message will appear on the display if a
malfunction is detected. In addition, sev-
eral settings for the displayed content can
be performed.
Combination meter display
1 Meter information screen (Refer to "Me-
ter information screen" �P196.)
2 Warning screen (Refer to "Warning
screen" �P196.)/Basic screen (Refer to
"Basic screens" �P198.)
3 EyeSight screen