Assembling A Rapid Diver System - Aqua Lung Rapid Diver User Manual

8

ASSEMBLING A RAPID DIVER SYSTEM

When you first receive your Rapid Diver System, it will be unassembled in
its box. It is beyond the scope of this manual to cover the assembly of Life
Support equipment, as this requires professional training. It will be necessary
to take your Rapid Diver System into an Authorized Aqua Lung Dealer to have
your Rapid Diver System assembled.
NOTE: The terms "Hook & Loop" are used throughout this manual. Hook & Loop is
commonly known as Velcro®, which is a trademarked brand of hook & loop. Some of
the BC components have hook & loop attachments.
NOTE: A water hydration bladder can fit inside the soft pack pocket. Water hydration
bladders are not available through Aqua Lung.
Front Mount Assembly
A cylinder can be attached horizontally to the front cylinder mount on the Rapid
Diver Pro BC (Fig. 1). This will create a more streamlined position and allows
for greater range of motion in the water.
1. Place the BC on a flat surface with the
front cylinder mount face-up (Fig. 1).
NOTE: The short cylinder bands must
be used to set-up a front cylinder mount
configuration.
Rapid Diver™ User's Manual
Front Cylinder Mount
Fig. 1