Aqua Lung Rapid Diver User Manual page 13

Threading the Cam Buckle
1. Firmly grasp the metal D-ring with your
left hand (Fig. 10)
2. While firmly holding the metal D-ring,
rotate buckle back towards the webbing.
The buckle should form an angle with
the metal D-ring as shown in the top
view (Fig. 11)
3. Insert band through the metal D-ring,
then through the middle slot of the
buckle (Fig. 12)
4. Insert band through the inside slot of
the buckle (Fig. 13)
NOTE: Threading steps are imprinted on
the plastic cam buckle.
.
.
.
.
Fig. 10
TOP VIEW
Fig. 11
Fig. 12
Fig. 13
13