Advanced Programming (8-Cycles Softener System) - Pentair Autotrol 255 Installer Manual

Installer Manual 255/LOGIX 742-762-764 - Programming
6.4.

Advanced programming (8-cycles softener system)

Note
Menus are displayed in a defined and incremental order.
Note
Press and hold
displayed on the bottom left of screen.
The 742/762/764 features an advanced programming level that allows the installing dealer to make
changes to the controller for more demanding applications. The homeowner/end user should never
have to access this level.
The advanced programming menu includes:
Parameter description
P1 Time of day
P2 Day of week
Time of
P3
regeneration
Days override
(Days between
P4
regeneration on
742 controller)
Day of week
P5
regeneration
P6 Salt amount
P7 System capacity
P8 Water hardness
* Calculated depending on salt setting and resin volume. The capacity may be manually adjusted.
52 / 92
+ for 5 seconds to access advance programming. A "P" symbol is
Default
Range of values
value
1:00 - 12:59
AM/PM 12:00 PM
0:00 - 23:59
- None
1:00 - 12:59
AM/PM 2:00 AM
0:00 - 23:59
0 - 99
- None
50 - 290 110
0.1 - 90
30 - 2000 250
Units of
measure
Hour: Range depends on value
minute selected for P10.
N/A -
Hour: Range depends on value
minute selected for P10.
0 = no calendar override.
0.5 = regeneration twice a day
0 Days
at time of regeneration and
12 hours later.
Day of week regeneration is
skipped if calendar override is
N/A
more than 0 (742 controller
only).
Unit of measure depends on
g/l
value selected for P9.
Unit of measure depends on
* kg
value selected for P9.
Unit of measure depends on
mg/l value selected for P9
(762 - 764 controllers only).
Ref. MKT-IM-021 / A - 20.02.2019
Notes