Basic Programming 764 Controller - Pentair Autotrol 255 Installer Manual

6.3.2. Basic programming 764 controller

6.3.2.1 Program valve and system types
Set your valve and system types through the options.
A Use and
types choices.
→ Display flashes.
B Choose the 255 valve type and the corresponding system type.
C Press to validate and advance to the next parameter.
D If an incorrect setting is programmed, see "Resetting the
controller", page 57.
Preprogrammed configurations:
Type
255A 255
273A 273
278A 278
293A 293
298A 298
255P 255
273P 273
278P 278
293P 293
298P 298
255L 255
263L 263
268L 268
273L 273
278L 278
293L 293
298L 298
6.3.2.2 Program system size
Set your resin volume in liters.
A Use and
→ Three dashes than resin volume flashes.
B Choose the nearest volume to your actual system size.
C Press to validate the system size selected and advance to
the next parameter.
D If an incorrect setting is programmed, see "Resetting the
controller", page 57.
Ref. MKT-IM-021 / A - 20.02.2019
Installer Manual 255/LOGIX 742-762-764 - Programming
to scroll through valve and system
Valve
Twin Alternating
Twin Parallel
Single tank or multi-simplex system
(Lockout).
Regeneration mode: metered, time
clock or remote regeneration
to scroll through resin volume choices.
Application
8-cycles softener
3-cycles filter
5-cycles softener
3-cycles filter
5-cycles softener
8-cycles softener
3-cycles filter
5-cycles softener
3-cycles filter
5-cycles softener
8-cycles softener
3-cycles filter
8-cycles softener
3-cycles filter
5-cycles softener
3-cycles filter
5-cycles softener
49 / 92