Pentair Autotrol 255 Installer Manual page 47

6.3.1.5 Regeneration time
Set the time when regeneration will take place.
A Press .
→ Regeneration time flashes.
B Adjust displayed time with
C Default setting: 2:00am.
D Press to validate the selection and advance to the next
parameter.
6.3.1.6 Days override (762 controller only)
Set the number of days for calendar override.
A Press .
→ Number of days flashes.
B Adjust displayed number with
→ Default setting: 0 day (disabled).
→ Days can be adjusted from ½ (.5) to 99 days.
C Press to validate the selection and advance to the next
parameter.
6.3.1.7 Days between regeneration (742 controller only)
Set the number of days between regeneration.
A Press .
→ Number of days flashes.
B Adjust displayed number with
→ Set to 0 to program as a day of week timer.
→ Days can be adjusted from ½ (.5) to 99 days.
C Press to validate the selection and advance to the next
parameter.
6.3.1.8 Day of week regeneration (742 controller only)
Note
This parameter is available only if days between regeneration is set to "0".
Select the days when regeneration will take place.
A Press .
→ Arrow flashes.
B Activate/deactivate the day indicated by the flashing arrow with
and .
→ A flag appears below the day when this is activated.
C Press to validate and repeat for each day.
Ref. MKT-IM-021 / A - 20.02.2019
Installer Manual 255/LOGIX 742-762-764 - Programming
and .
and .
and .
47 / 92