Table of Contents
Advertisement
Chapter 6: Deploying the Management Cluster
Installing Windows Server 2016 and network drivers on the
management server
Install Windows
Server 2016
Install the
Mellanox CX4 LX
Dual Port rNDC
driver
40
Dell EMC Ready Stack: Microsoft Hyper-V on PowerEdge 14G Servers and Unity Storage
Deployment Guide
Install Windows Server 2016 on the management server:
1.
Select a language preference, time and currency format, and keyboard or input
method, and then click Next.
2.
In Windows Setup, click Install now.
3.
Enter the product key, and then click Next.
4.
Select OS > Windows Server 2016 Datacenter (Server with GUI), and then
click Next.
5.
Select I accept the license terms, and then click Next.
6.
In Installation type, select Custom: Install Windows only (advanced).
7.
Select Drive0 Unallocated Space and click New to create the partition.
8.
Click Next.
The following message appears:
To ensure that all Windows features work correctly, Windows
might create additional partitions for system files
9.
Click OK.
10.
After the installation is complete, on the Settings page, set the username and
password.
Install the Mellanox driver on Windows Server 2016:
1.
After the server reboots, open the iDRAC Virtual Console.
2.
Log in to the PowerEdge R740 server.
3.
Browse to the location to where you downloaded the file and double-click the new
file.
You can download driver files from
Online Support.
4.
Read the release information that is presented in the dialog box.
5.
Download and install any prerequisites that are identified in the dialog box.
6.
Click Install.
7.
Follow the remaining prompts to perform the installation.
8.
To view the network card configuration, select Start > Run on the Windows
desktop, open the following file:
ncpa.cpl
The Network Connections window displays all the NIC cards.
Support for PowerEdge R740
on Dell EMC
Advertisement
Table of Contents
