P1-3 Perform Axle Maintenance - 1000 Hours - Genie GTH-636 Maintenance Manual

Maintenance Manual
Programmed Maintenance Procedures
P1-3 P1- 3 Perform Axle M aintenanc e – 1000 H ours
Perform Axle Maintenance –
1000 Hours
Axle specifications require that this procedure be
performed every 1000 hours.
Required maintenance procedures and additional
axle information are available in the manufacturer's
manuals. Refer to Specifications,
Maintenance Manuals
.
Dana Models
• Negative brake - adjust
• Hub oil level - change
• Planetary reduction lubricating oil - change
Carraro 26.27M Models
• Change axle oil 1500 hrs
• Clean magnetic oil plugs 1500 hrs
Comer Models
• Differential lubricating oil - change
• Planetary reduction lubricating oil - change
• Magnetic plug - clean
50
Operator and
Genie Telehandlers
September 2016
Part No. 1272858