P0-3 Perkins Engine Maintenance - Under 1000 Hours - Genie GTH-636 Maintenance Manual

Maintenance Manual
Programmed Maintenance Procedures
P0-3 P0- 3 Perki ns Engine M aintenanc e – U nder 1000 H ours
Perkins Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications,
This maintenance schedule applies to the following Perkins Engines:
Perkins 854E-E34TA
Perkins Engine
Procedure
Oil level - check
Coolant level – check/add
Oil, fuel and coolant systems - check for leaks
Air filter discharge valve - clean
Fuel system filter/water separator – drain
Alternator belt - inspect/adjust/replace
V-belts - inspect/adjust/replace
Exhaust system - check for leaks
Fuel tank water/sediment - drain
Hoses and clamps – inspect/replace
Engine valve lash – inspect/adjust - 1104D-E44TA Models (initial one time service)
Battery electrolyte level - check
Cooling system supplement additive - test/add
Engine oil and filter – replace
Fuel system filter(s) - replace
Radiator – clean
Air cleaner element - clean/replace
Fan clearance - check
44
Engine Operator and Maintenance Manuals
Perkins 1104D-E44TA
Genie Telehandlers
Programmed Maintenance Inspection Report
Perkins 1204E-E44TA
∅ = Not required
September 2016
.
Hour Intervals
Daily 50 500
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
Part No. 1272858
for
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅