P0-2 Deutz Engine Maintenance - Under 1000 Hours - Genie GTH-636 Maintenance Manual

September 2016
P0-2 P0- 2 D eutz Engine M aintenanc e – U nder 1000 H ours
Deutz Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications,
This maintenance schedule applies to the following Deutz Engines:
Deutz TD 2.9 L4
Deutz Engines
Procedure
Oil level - check
Coolant level - check
Oil, fuel and coolant systems - check for leaks
Fuel system filter/water separator – inspect/drain
Air filter discharge valve - clean
Engine tightness – check for leaks
Exhaust system - inspect
Fuel pre-cleaner / fuel pre-filter - clean
Cooling system- check
Engine oil and filter – replace
Air filter - replace
Valve clearance - check/adjust
Engine coolant - test/add
Air intake pipes - inspect
V-belts - inspect
Fuel filter / separator - replace
Part No. 1272858
Programmed Maintenance Procedures
Engine Operator and Maintenance Manuals
Deutz TCD 3.6 L4
Genie Telehandlers
Programmed Maintenance Inspection Report
Deutz TCD 4.1 L4
∅ = Not required
Maintenance Manual
.
Hour Intervals
Daily 250
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
for
500
∅
∅
∅
∅
∅
∅
∅
∅
∅
43