P0-4 John Deere Engine Maintenance - Under 1000 Hours - Genie GTH-636 Maintenance Manual

September 2016
P0-4 P0- 4 J ohn D eere Engi ne Mai ntenance – Under 1000 H ours
John Deere Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications,
John Deere 4045TH485
Procedure
Oil level - check
Coolant level – check/add
Fuel system filter/water separator – drain
Air filter discharge valve - clean
Oil, fuel and coolant systems - check for leaks
Air cleaner - check
Visual inspection of engine
Engine oil - replace
Oil filter - replace
Engine mounts - inspect
Battery - check
Crankcase vent system - check
Air intake system - inspect
Cooling system - check
Engine ground - check
Air filter - replace
Engine belts - check/adjust/replace
Fuel system - check
Fuel filter - replace
Part No. 1272858
Programmed Maintenance Procedures
Programmed Maintenance Inspection Report
Engine Operator and Maintenance Manuals
∅ = Not required
Genie Telehandlers
Maintenance Manual
.
Hour Intervals
Daily 500
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅
for
45