September 2016
Q-10
Q-10 Ins pec t the Engine Air Filter
Inspect the Engine Air Filter
Genie specifications require that this procedure be
performed quarterly.
Perform this procedure more often if dusty
conditions exist.
Maintaining the engine air filter in good condition is
essential to good engine performance and service
life. Failure to perform this procedure can lead to
poor engine performance and component damage.
Note: Perform this procedure with the engine off.
1
Release the latches on the cover of the air
cleaner assembly. Remove the cover.
2
Gently twist and pull out the external or
primary filter element.
3
Remove the inner or secondary filter element.
4
Clean the inside of the canister and the gasket
with a damp cloth.
5
Inspect the primary and secondary air filter
elements. If needed, blow from the inside out
using low pressure dry compressed air, or
carefully tap out dust.
6
Install the secondary filter element first, then
install the primary filter element.
7
Install the front cover onto the air cleaner
assembly and secure the latches.
Part No. 1272858
Quarterly Maintenance Procedures
Q-11
Q-11 Lubricate the Driv es haft
Lubricate the Driveshaft
Genie specifications require that this procedure be
performed quarterly.
Greasing the specified locations is essential for
good machine performance and service life.
Operating the machine with little or no grease may
cause the machine to perform poorly and continued
use may cause component damage.
1
Using a grease gun, thoroughly grease each
driveshaft, at both ends of the driveshaft.
Grease Specifications
Chevron Ultra-duty grease, EP NLGI 2 (lithium based)
or equivalent
Genie Telehandlers
Maintenance Manual
35