P0-6 Transmission Maintenance - Under 1000 Hours - Genie GTH-636 Maintenance Manual

Maintenance Manual
Programmed Maintenance Procedures
P0-6 P0- 6 Transmissi on Mai ntenance – Under 1000 Hours
Transmission Maintenance – Under 1000 Hours
Additional transmission maintenance is required. Refer to the
for the specific intervals that apply.
Required maintenance procedures and additional transmission information are available in the
manufacturer's manuals. Refer to Specifications,
This maintenance schedule applies to the following transmissions:
Dana VDT12000 Dana TT20000
Transmissions
Procedure
Transmission oil level - check/add*
Drop box oil level - check/add
Transmission filter - replace (initial, one-time interval)
Transmission oil - replace (initial, one-time interval)
*check oil with engine running at idle and oil at 180-200° F / 65-93° C
48
Operator and Maintenance Manuals
Dana Integral Gear Box Shift on Fly
∅ = Not required
Genie Telehandlers
Programmed Maintenance Inspection Report
ZF 4 WG-98 TC
Hour Intervals
Daily
∅
∅
September 2016
.
100
∅
∅
Part No. 1272858