Engineering Mode - SCS Sentinel WDP200 User Manual

Engineering Mode

Delete the Registered Outdoor Station
1. Press and hold the
seconds in standby mode, then the display will show as follow:
2. After 5 seconds, it will exit automatically.
Change the Unlock Time
1. Press and hold the
seconds in standby mode, then the display will show as follow:
2. Press Left or Right
3. Press Up or Down
are selectable), then press the Right soft key
display will show OK.
4.After 5 seconds, it will exit automatically.
and at the same time about 5
and at the same time about 5
to select the Outdoor station
to select the unlock time(1- 25
EN
to confirm, the
EN ::: 23