SCS Sentinel WDP200 User Manual page 17

EN
Operations (continued)
Human Sensor
1. Slide the switch on the rear of the Outdoor station to the "ON"
position.
r station to the
2. If an object move continuously for about 5 seconds within the
conds within the
visual range of the camera, the Outdoor station will detect
on will detect it
it and the image will be shown on the receiver. Please kindly
Please kindly
note when the Auto Snap is On, the camera will take photos
will take photos
automatically, otherwise the function is not avaibable.
ailable.
3. The automatic detection will only last for about 15 seconds
ut 15 seconds
and 20 seconds later, the detection will be repeated.
eated.
Note :
● Also, you can press
standby mode
EN ::: 16
Chapter 6: Snap Show
Page 20:
Chapter 6: Snap Show
Page 20:
Note:
Also, you can press
standby mode.
key to replay the photos in the
add the note
add the note
key to replay the photos in the