Light Sensor - SCS Sentinel WDP200 User Manual

Operations (continued)
Calling Receiver
In standby mode, press the Call button on the Outdoor .
The corresponding receiver rings, and the image of the visitor
appears on the LCD of the receiver.
1. If the master does not want to answer, press
the ringer and the video.
2. After the master press
3. Press to end the conversation.
4. During the conversation, press and hold
be zoomed.
Notes :
● The conversation can be up to 2 minutes. After 2 minutes,
the line will be disconnected automatically.
● The monitor process can be up to 5 minutes. After 5
minutes, the receiver will exit monitor mode automatically.
Unlocking
During a conversation, to unlock the door, press

Light Sensor

When someone presses the Call button on the Outdoor station, all
the LED lights will light on if the ambient environnement gets
too dim.
Undisturbed Mode
When visitor calls, if you press and hold
the connection between receiver and outdoor station in 5 minutes.
After 5 minutes, the connection will be resume automatically, or
you can press
, the conversation starts.
again to get back to the original status.
to cancel
, the picture will
the receiver.
3 seconds, will disable
EN
EN ::: 15