Fisher easy-Drive 200L Instruction Manual page 2

easy-Drive 200L
December 2018
Table 1. Specifications
Available Actuator Configurations
Positioning
Power Requirements
9-30VDC, minimum 4 amp power supply required
(fuse to 5 amps)
Material Temperature Capabilities
Electric Actuator Assembly:
-20°C (-4°F) to 70°C (158°F)
Maximum Current Draw
4 amps
Idle Current Draw
15 mA at 24VDC, 25 mA at 12VDC
Conduit Connections
Two 3/4 NPT connections
Maximum Stroke Length
19 mm (0.75 inch)
Maximum Thrust
3336 N•m (750 lbSf)
1. 10% variation can be expected, based on temperature and pressure of application.
2
Average Thrust
2446 N•m (550 lbSf)
(1)
Nominal Stroke Speed
3.9 mm/s (0.15 inch/s) at 24 VDC
2.2 mm/s (0.09 inch/s) at 12 VDC
Hazardous Area Approvals
CSA (C/US): Explosion­Proof Class I, Division 1,
Groups C and D, T6, Ex d IIA T6, Class I, Zone 1, AEx d
IIA T6
ATEX Flameproof - Gas:
II 2 G, Ex db IIA T6
IECEx Flameproof - Gas: Ex db IIA T6
Enclosure Rating
Type 4X and IP66
Duty Cycle
50% maximum
Enclosure Material
Cast aluminum alloy with powder coat paint
Approximate Weight:
9.5 kg (21 lbs)
Instruction Manual
D104331X012