Uwatec A700 Maintenance Manual page 6

A700 Step-by-step maintenance procedures.
31. Remove inlet tube
o-ring.
32. Grasp, twist and
pull the exhaust T
free.
The slight twist helps
removal and/or break
up of unseen
encrusted salt.
Note the position of
the index figure and
thumb inside the ends
of the exhaust T.
Exhaust valve need
not be removed.
Inspect the exhaust
valve for any signs of
damage or
imperfections.
Note: Inspect for
insect/rodent damage.
33. Look from the side
to be sure the exhaust
valve is laying flat and
maintaining a good
seal to the case.
34. Remove the
mouth piece by
"releasing" the
specialized clamp
locking device.
See next image for
more detail...
Cleaning suggestions
continued on next page...
6
35. To release the clamp lock,
position your tool of choice on
one of the outside "guides"
of clamp locking mechanism –
rather than the "hook‟ itself.
36. Pull the
mouthpiece free and
inspect.
37. Grasp, twist and
pull the "mouthpiece
support" free.
Serial Number