Mode Selection - Vortex Impact 850 Manual

MODE SELECTION

Your Impact 850 is factory set to the angle compensating
®
HCD mode and yards.
To change modes: After the Impact 850 is powered up,
activate the Mode Selection by pressing and holding the
Menu button for at least four seconds. Once the Mode
Selection screen displays, release the button.
As you progress through Mode Selection, you may exit at
any time and save your settings by pressing and holding the
Menu button for at least four seconds—the Impact 850 will
then return to power-up condition.
Mode Selection Display
Use the Menu button
to activate the Mode
Selection displays.
Use the Measure
button to toggle
through each Mode
Selection option.
6
SET AND SAVE MODE SELECTIONS
1. Choose between the HCD and LOS Modes.
After activating the
Mode Selection, press
the Measure button to
toggle between the HCD
and LOS displays. Press
the Menu button to save
your desired choice and
move to the Yards/Meters
selection screen.
2. Choose between Yards and Meters Display.
After activating the Mode
Selection, press the
Measure button to toggle
between the Yards and
Meters display. Press
the Menu button to save
your desired choice.
To exit Mode Selection and save settings, press and hold
the Menu button for four seconds. Settings will also save
when the Impact 850 powers down automatically.
®
Choose Between HCD and LOS
Choose Between Yards and Meters
7