Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Vortex Ranger 1500
Summary of Contents for Vortex Ranger 1500
- Page 2 Rangef inder The Ranger 1500 Rangefinder The Ranger 1500 is an extremely effective angle- compensated laser rangefinder intended for both archer and rifle shooter. Using the primary HCD (Horizontal Component Distance) mode, the Ranger 1500 provides the key angle compensated range...
- Page 3 Power Up Adjust Focus with Once you install the battery, the Ranger 1500 is in Eyecup Ready Condition—the normal power-off condition when not ranging. To power up the Ranger 1500 from Ready Condition and prepare for ranging, press and release the Measure button.
- Page 4 Rangef inder et and electiOns in teps electiOn Your Ranger is factory set to the angle compensating HCD mode, yards, and 1. Choose between the medium brightness. For most users, these HCD and LOS Modes. are the preferred settings. After activating the Mode Mode Selection To change modes, after the Ranger is Selection, press the...
- Page 5 Measure button to toggle through the three Brightness With the Ranger 1500 powered up, position the crosshair on settings. Press the Menu button to save your desired setting the target object and press and release the Measure button and move back to HCD/LOS selection screen.
- Page 6 • Rifle shooting out to ranges of 800 yards with mild slopes Hcd M (less than 15 degrees). The Ranger 1500’s HCD range display is intended to be the primary mode—used for most all rifle and archery shooting • Rifle shooting out to ranges of 400 yards with moderate conditions.
- Page 7 Rangef inder lOs M LOS Mode – Using the INC Number The Ranger 1500’s LOS (Line of Sight) mode is intended for When in LOS mode, an additional number is displayed below rifle shooters who are using slope correcting ballistic drop the yardage number.
- Page 8 Rangef inder eature ripOd se FOr anging The Scan feature can be used to range moving targets or Using a tripod to steady the Tripod Socket help range smaller targets on uniform backgrounds in either rangefinder will increase your HCD or LOS modes. Once powered up, press and hold the ability to range small targets at Measure button and scan laser back and forth, watching for longer distances.
- Page 9 Rangef inder pulse better than less dense items such as bushes. angeFinding Laser rangefinders work by emitting a brief pulse of light • Flat surfaces perpendicular to the laser pulse will reflect aimed at a target object. Distance is determined by the better than curved surfaces or surfaces angled in relation amount of time taken for the light to emit and return to the to laser pulse.
- Page 10 Rangef inder vip W aFety and recautiOns arranty Do not stare into beam or view directly without laser eye We build optics based on our commitment to your absolute protection. Staring continuously into beam for prolonged satisfaction. That’s why our products are unconditionally periods of time could cause harm to your eyes.
- Page 11 vtxOptics #RRF-151-16/S...