Removing Seat Pad Set For Cleaning - Safety 1st Grow and Go Comfort Cool Manual

59
4
5
Buckle the Vehicle Belt
Pull up on lap belt to tighten.
Position Shoulder Belt
on Child
Pull up on shoulder belt to tighten.
The shoulder belt should lay
under the In and Out Harness
Holder as shown.
The shoulder belt should lay
snugly across the center of the
child's shoulder and across the
chest and not on their face
or neck.
Only use the shoulder belt-
positioning guide in the
headrest if necessary to help
position the shoulder belt
correctly on the child.
Finished!
Check periodically to make sure
your child has not moved out of
position and loosened the shoulder
belt.
Removing Seat Pad Set
for Cleaning
You DO NOT need to remove the harness system to remove
the pad from the shell. To remove accessories, see pages
3-5.
1
Unbuckle Harness
Press in towards the top of
the red button.
Pull buckle tongues out.
2
Fully Loosen Harness
Straps
Push down on harness release
lever (through opening in pad)
while pulling out on harness
straps as shown.
3 Adjust the Headrest to the
Highest Position
At the Headrest/Harness
4
Adjustment Handle, Pull
the Fabric Tab Out from
Between the Headrest
and Headrest Foam
As Shown
60
continued on next page