Vehicle Belts - Safety 1st Grow and Go Comfort Cool Manual

21
Lower Anchor Belt
Storage Location
To Remove Lower Anchor Belt from Storage
Location on Car Seat:
Press the red release button on each
connector, then pull the connectors off of storage attachments.
To Remove Lower Anchor Belt from
Vehicle Lower Anchor Bars:
Press the red release button on each
connector, then pull the connectors out
of the vehicle seat bight.
To Store Lower Anchor Belt:
When using vehicle belts, using the
booster seat mode, or when the car seat
is not installed in a vehicle, the lower
anchor belt must be properly stored in its
storage location.
Lower Anchor Belt
Thread lower anchor belt through rear-facing
Storage Location
belt path then attach connectors to storage
attachments as shown.
Gently tighten to remove slack.
Adjuster
Lower Anchor
Connectors
Lower Anchor
Belt Parts

Vehicle Belts

Your vehicle's features may be considerably different
than those pictured here.
If lower anchors are not an option or if your child weighs more
than 40 lb (18 kg), you must use the vehicle seat belt system to
install the child restraint.
Not all vehicle belts and seating positions will work with
child restraints.
Please go through the steps following steps to understand
how to lock a child restraint in
Facing mode with a vehicle belt.
22
Lap/Shoulder Belts
Rear-Facing or Forward-
continued on next page