Preparing Car Seat For Child Fit - Safety 1st Grow and Go Comfort Cool Manual

Preparing Car Seat for Child Fit

7
1
2
Buckle
Tongue
3
Release
Button
Fully Loosen Harness
Straps
Push down on harness release
lever (through opening in pad)
while pulling out on harness
straps as shown.
Unbuckle Harness
Press in towards the top of the
red button to release the buckle
tongues.
Release Chest Clip
Hold each side of the chest clip
and press on the release button
with your thumb and pull apart.
4 Place Harness Straps Out
1
of the Way
The In and Out Harness Holders
can be used two ways:
1. You can secure the harness
straps around them as shown.
2. Or the buckle tongues can
be placed into the slots in the
harness holders as shown.
2
Place Child in Car Seat
5
to Determine Proper
Harness Fit
The child's bottom and back
should be fl at against the
car seat.
For Rear-Facing child fi t, see page 9.
For Forward-Facing child fi t, see page 10.
8