Reclining Car Seat; Removing Seat Pad Set - Safety 1st Grow Manual

49

Reclining Car Seat

This car seat has 3 positions.
Rear-Facing Mode
For children who cannot sit up unassisted, the
Facing Level Line
the ground using either Position 3 or 2.
For children who can sit up unassisted, you may make the
car seat more upright in Position 2.
Forward-Facing Mode
Booster Seat Mode
To Recline: Pull the recline handle out and push the top of
the car seat back.
For More Upright: Pull the recline handle out and pull the
top of the car seat forward.
- 3 Reclined or 2 Semi-reclined
Rear-
*When used in
on the car seat MUST be parallel with
Facing Mode
Seat Mode, semi-reclined
Position 2 is ONLY to
be used if necessary to
- 1 Upright or 2 Semi-reclined * install the car seat fl ush
against the vehicle seat
- 1 Upright or 2 Semi-reclined *
back.
The vehicle seat back
MUST be upright.
You do not need to
remove the harness
Forward-
system to remove
or Booster
the pad from the
car seat.
DO NOT fully pull
the harness strap
out of the car seat.
Adjust Headrest
Leave it threaded
in the hip harness
slots. If removed,
you will not be able
to rethread it.
To remove
accessories, see
pages 3-4.

Removing Seat Pad Set

1 2
On Select
Models: Undo
to Highest
Fabric Tab Slot
Fasteners on
Position
Headrest Pad &
Pull the fabric tab
Seat Pad
out of the slot in the
headrest as shown.
50
3 4
Gently Pull
Locate Pad
Headrest Pad
Off Bottom
in Headrest
of Headrest
continued on next page