Safety 1st Grow and Go Comfort Cool Manual page 12

17
8
From Back of Seat,
Remove Harness Strap
Loops From Splitter Plate
9
Pull Harness Straps Out of
Upper Shoulder Harness
Slots
10
Pull Back Body Pillow
Forward Away from Seat
Thread harness straps through slots
in back body pillow.
You
body pillows.
11
Thread Harness Straps
Through Lower Shoulder
Harness Slots For Smaller
Infants in Seat Pad and Shell
must
use the back and bottom
12
From Back of Seat, Pull
Harness Straps Through
Shell
Harness straps must be in shoulder
harness slots below the metal bar
as shown.
Do not twist harness straps.
13
Attach 2nd Harness Strap
Loops to Splitter Plate As
Shown
Sewn ends of the harness strap loops
must face towards you.
Do not twist harness straps or
harness adjustment strap.
Make sure the same harness strap
loops are fitted completely on both
sides of the splitter plate.
Check your child's fit often.
The harness strap must be returned
to the upper shoulder harness slots
as your child grows.
sewn
end
WARNINGS:
Harness system must be installed
correctly.
Failure to follow these steps can result in serious injury
or death.
18