Cembre HTEPE.DET12 Operation And Maintenance Manual page 3

HTEPE.DET12 system consists of:
– Pump unit
– Hydraulic head type RHTEPE-S
– Plunger type OG 13.2T (qty 2)
– GO / NO GO gauge type CAL 22.23
– Plastic case VAL-P14
– Application range:
HTEPE.DET12: suitable for installing rail web electrical connection system having
M12 bolt (e.g. AR61, AR65, AR261, AR265).
HTEPE.DET16: suitable for installing rail web electrical connection system having
M16 bolt (e.g. AR6116, AR6516, AR26116, AR26516).
– Installation force: ........................................................................................................................55 kN
– Rated operating pressure: .......................................................................................................700 bar (10000 psi)
– Flexible hose: length ..................................................................................................................900mm
– Dimensions (pump body): length ........................................................................................285 mm
– Dimensions (head):
– Weight: ............................................................................................................................................3,8 kg
– Recommended oil: ......................................................TOTAL DIEKAN 1640
– Safety: the tool is provided with a maximum pressure valve.
2.1) Setting
Connect the male coupler of the head to the female coupler on the tool hose; ensure that the couplers
are securely fi tted.
Before connecting or disconnecting the head and the hose, ensure that the ram of the head is
fully retracted.
3
1. GENERAL CHARACTERISTICS
width ..........................................................................................130 mm
length RHTEPE-S ....................................................................116 mm
length RHTEPE-S16 ...............................................................133 mm
width ..........................................................................................67,5 mm
diameter ...................................................................................48 mm
2. INSTRUCTIONS FOR USE
HTEPE.DET16 system consists of:
– Pump unit
– Hydraulic head type RHTEPE-S16
– Plunger type OG 16.2T (qty 2)
– GO / NO GO gauge type CAL 22.23
– Plastic case VAL-P14
or equivalent