Radiator Sub Fan And Fan Motor - Subaru LEGACY 2006 Manual

asieps_tobira.book 27 ページ ２００９年１０月２６日 月曜日 午前９時１６分
9. Radiator Sub Fan and Fan
Motor
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Disconnect the sub fan motor connector (B).
6) Remove the heat shield cover from radiator. (AT
model)
7) Drain the coolant about 1 2 (1.06 US qt, 0.88
Imp qt). <Ref. to CO(H4DOTC)-13, DRAINING OF
ENGINE COOLANT, REPLACEMENT, Engine
Coolant.>
8) Remove the ATF hose from the clip of the radia-
tor sub fan motor assembly. (AT model)
9) Lower the vehicle.
10) Remove the air intake duct.
11) Disconnect the over flow hose.
12) Remove the over flow pipe.

Radiator Sub Fan and Fan Motor

13) Remove
CO(H4DOTC)-30, REMOVAL, Reservoir Tank.>
14) Remove the mounting bolts from the radiator
sub fan motor assembly.
15) Disconnect the radiator inlet hose (A) from the
radiator.
IN-00203
16) Remove the hood stay holder (B).
(B)
17) Remove the radiator sub fan motor assembly
from the vehicle.
CO-00252
CO-00250
CO(H4DOTC)-27
COOLING
the reservoir tank. <Ref.
CO-00292
(A)
(B)
CO-00255
to