XP Metal Detectors Goldmaxx Power Instruction Manual page 8

A S S E M B L Y
O F D E T E C T O R
To hold the cable along the telescopic stem you can use Velcro® strip as
shown on the photo below(C & D).
Option 2 : Electronic box hipmounted
Removal of control box

The hipmount bag provided with your detector can allow you to
protect your detector from rain when the electronic box is fixed on
the armrest.
Insert the control box into the hipmount bag.
Then insert the connector (female) in its panel
connector (male) and screw it.
To remove the control box from the armrest, proceed
as indicated below.
Put your hands around the control box and press slightly
with your thumbs on the side of the armrest (1).
Whilst you keep the pressure on, slip the armrest off,
and remove completely the control box from the
armrest (2).
7
3