Multi Tones Information - XP Metal Detectors Goldmaxx Power Instruction Manual

M U L T I - T O N E
I N F O R M A T I O N
In Multi-Tone mode the signal tones vary depending upon the object
found. The pitch of signal depends upon conductivity, the higher the
conductivity, the higher the pitch.
Iron has a very special signature that can be recognised easily. We have
assigned it a low-pitched sound together with a volume setting (IRON
LEVEL) so that you can make the low tone more or less conspicuous. (This
is assigned to iron and coke).
This operating mode allows for improved analysis and understanding of
the detected area, e.g. in order to find areas of former human
habitation. It also facilitates recognition of large ferrous objects (such as
old weapons). Everybody will find a use for it.
Certain types of moist ground with a low mineral content
may also trigger a low-pitched sound. The IRON LEVEL
setting
phenomenon related to the 18 kHz detector frequency.
On certain types of ground, especially those contaminated by copper
shot gun cartridges or little pieces of aluminum foil, Goldmaxx Power
will can signal the presence of debris by means of a medium-pitched
tone, whereas as decent targets will trigger a high-pitched sound. It
is up to the user to decide whether or not to dig, depending on how
promising the area is, the type of target he or she is looking for and
the density of rubbish, since certain small "decent" targets, such as
very small coins, may also trigger a medium sound.
may reduce
16
or entirely
6
eliminate that