Table of Contents
Advertisement
C O N T R O L S
O
I/O, SENSITIVITY
N
_______________________________
Turn the machine on with the SENSITIVITY I/O control.
You will hear some quick "beeps" which will tell you
that the detector is correctly operating, wait for the
extra 2 beeps after 5-10 seconds.
Then you can detect.
Avoid testing your detector inside your house or in shops
because you can encounter a lot of metallic and electromagnetic
interference (reinforced concrete, pipes, cables and fluorescent
The control also enables you to adjust the sensitivity of your detector.
The sensitivity level determines the depth of detection and the stability
of your machine. It can be adjusted to suit the environment so as not to
be plagued with false signals.
Please note that this new detector has a more advanced
SENSITIVITY setting compared to previous GOLDMAXX model,
enabling you to make gradual adjustments to help alleviate false
signals.
The range of adjustments has been widened to offer more
sensitive adjustments at the top end of the range.
You should therefore not be surprised if you have to lower the
potentiometer settings on bad ground. The performance of the
machine will not diminish.
10
5
lights).
Hide quick links:
Advertisement
Table of Contents
