Freq. Shift - XP Metal Detectors Goldmaxx Power Instruction Manual

C O N T R O L S
FREQ.
SHIFT.______________________________
The FREQ. SHIFT switch eliminates interference
which would otherwise be caused between two XP
detectors used within close proximity of each
other.
It can act on two settings simultaneously:
the working frequency of your detector:
the wireless headphone output channel:
How to use the FREQ. SHIFT. switch.
If you are working ALONE without your XP wireless headphones:
it is better to use FREQ. SHIFT.
✓
The XP wireless headphone output will be switched off and therefore not
use up power. The detector will be set on frequency 1.
If you are working ALONE with an XP wireless headphones:
you can use FREQ. SHIFT.
✓
✓
You should also consider adjusting the input channel of the XP wireless
headphones on the earpiece. Simultaneously hold down the ± buttons for
five seconds. See the XP wireless headphones user manual for more
information.
on the middle setting: DETECT Freq1 / WS1 OFF position
on a low setting: DETECT Freq 1 / WS1 CH2 position
on a high setting: DETECT Freq 2 / WS1 CH1 position
✓ Freq1 or Freq 2
✓ CH1 or CH2
14
5