XP Metal Detectors Goldmaxx Power Instruction Manual page 4

I N T R O D U C T I O N 1
You will find it much easier to adjust the controls to optimise your search
technique to the type of area you are searching in, thanks to the Multi-
Tone mode with setting of the low tone (IRON LEVEL) and the rocker
threshold.
We chose instantaneous sound signalling, rather than an LCD display
because of the extraordinary ability of the human ear to analyse
compared to an LCD display.
LCD displays cannot respond in real time and do not capture weak signals
that are too brief or too close to other signals
Goldmaxx Power sound signalling provides real-time output of
the most imperceptible signal.
Goldmaxx Power is fitted with a DD 9" (22.5cm) carbon fibre search
head with a more robust coil cover.
Our high sensibility "double D" search coils, provide very good ground
penetration.
The optional elliptical 5" x 10" search coil will improve the selectivity on
iron infested areas, this is the best complementary coil for the Goldmaxx
Power.
The Goldmaxx Power search heads are not compatible
with those of other XP detectors
due to their specific frequency (18kHz).
3