Table of Contents
Advertisement
C A R E
I N S T R U C T I O N S
Our detectors are designed to be as robust as possible, however, like
any electronic precision instrument, they require some care.
The XP search coil cable has been designed so as to resist long term
movement. However you should take some precautions and prolong the
life of your detector :
to remove the connector from the control box, it is important never to
pull on the cable only the connector.
It is important to leave enough slack at the bottom of the cable near
the coil to allow for adjusting the coil angle without placing strain on the
cable.
It is important not to replace the Velcro with tape as this will centre
the movement on one single part of the cable.
when the box is hipmounted, put it on your side or on your back in
order not to fold the cable of the connector when you lean forward.
(Diagram 1)
when the box is hipmounted, to prevent strain on cable and
connector, you should slide the cable through the hipmount bag belt strap.
Diagram 2
diagram 1
19
8
diagram 2
Hide quick links:
Advertisement
Table of Contents
