Maintenance And Care; Normal Maintenance - Boqballe EX Manual

EX(W)
Trend

NORMAL MAINTENANCE

The BOGBALLE machine is manufactured in such a way that it requires a minimum of
maintenance.
In the construction it is considered that cleaning and lubrication can be completed quickly
and thoroughly – without taking apart the machine.
The surface treatment consists of a robust powder paint – in addition all essential wear parts
and bolt assemblings are made of stainless steel.
Many of the components of the machine are greased once and need no extra maintenance,
for instance the central and angle gears of the transmission.
The maintenance mentioned below is absolutely necessary!
"If the machine is maintained – it will still be new - in 5 years ! "
"If the machine is not maintained – it will be old – next year ! "
The machine must always be thoroughly cleaned after use. The cleaning
should be done with water perhaps with soap in it. When using a high-
pressure cleaner only use low pressure and do not clean direct on the axle
seals of the transmission.
Do not use grease-removing cleaning liquid – without giving the machine –
just after drying – an application of anti corrosion oil.
Remember always to grease all of the machine in a corrosion protecting
liquid
(for instance oil)
•
Without protection, rust might arise within a few hours in areas,
where the paint has been damaged – because fertiliser salts hold
acid and is therefore most corrosive.
Any paint damage should be cleaned and painted. A possibility could also be to treat the
damage by Tectyl or a similar product.
Please consider that cleaning products and corrosion protecting liquids
might include dissolvents that might dissolve the glue fixing the transfers.

MAINTENANCE AND CARE

. It is not sufficient just to wash the machine.
5