Headland Spreading From Border - Boqballe EX Manual

EX(W)
Trend
HEADLAND spreading, FROM BORDER
(Option)
direction
The BOGBALLE machine can by means of a cable switch
.....be changed to HEADLAND spreading – without leaving the tractor cabin.
While spreading on HEADLAND the NORMAL settings of the machine are retained - except:
THE ROTATION DIRECTION OF THE SPREADING DISCS
•
÷
≠
≡
+
ALWAYS STOP PTO when changing the rotation direction!
PTO- SPEED
•
It must be considered that the fertiliser when spreading on HEADLAND – will to a higher extent
than at NORMAL spreading – be thrown forwards in the driving direction.
All above "switches"
same time the rotation direction of the spreading discs is reversed
The rotation direction of the spreading discs is changed so that the spreading discs
rotate "away from center".
manually or by cable.
The PTO- speed is reduced in comparison to the NORMAL spread width.
The HEADLAND pattern FROM BORDER will only to a limited degree be
Deflector it tilted down
Close right outlet of the spreader
The right agitator is stopped
The back side of the vane is used
•
≡
• ÷ ≠ ≡
are made in one "switch" – via link arms – and at the
(See FUNCTION OF SPREADING VANE / Trend SYSTEM) Is done
changed when changing the PTO rpms.
,
with border to the right in the driving
(option)
•
÷
÷
30
:
Made by one switch
T-transmission w/ cable
HEADLAND
rotation direction
≠